How to Reset Arris Surfboard SB8200?
Certain cases are there when you need to reset Arris Surfboard SB8200. It needs to be done when your Surfboard denies connecting to the internet or you cannot access the local interface of the router. Whatever the reason is, this blog will help you learn how to reset SB8200 in a few easy steps. Let’s get started.
What Does a Factory Reset Do to the SB8200?
Before learning the complete instructions, you must know what the outcomes of resetting the Surfboard router are. Know that when you reset the modem router, it starts running on the factory default settings. In other words, all the changes done by you will be erased. The Arris router login password will return to its default value (last 8 digits of the serial number of modem). This password is also given in the user manual. Moving on, let’s straightforward discuss the steps to reset the Surfboard router.
How to Factory Reset Arris Surfboard SB8200?
The steps given below will help you out no matter whether the router is working on the firmware version 1.01.009.47 or later.
- Ensure that the modem router is getting a stable power supply.
- Once ensured, find the RESET button. It is generally located at the back.
- Using the tip of a pen or the end of an unwound paperclip, press the RESET button.
- Hold down the button for 10 seconds or more.
- Release the button when the front panel’s LEDs start flashing.
- The modem is reset now.
This is how to reset Arris Surfboard SB8200. This is to inform you that, there will be a minute delay for the Power light on the Surfboard panel to glow after your modem boots up followed by the reset process. After the reset process, you can set up the system once again by via web manager login. Refer to the next section for the quick setup of the system via 192.168.0.1.
How to Install Arris Surfboard SB8200?
Ensure that your modem is plugged into a working socket and that it is connected to the coaxial cable running directly from your ISP. After that, follow these steps:
- Connect the PC to the modem router using a LAN cable.
- Let the Power LED on your Surfboard flash green.
- Launch a web browser such as Explorer or Firefox. You can also use Safari.
- Once done, type surfboard.com into the address box and press Enter.
- The default IP address – 192.168.0.1 – can also be used for the same.
- This will take you to the service provider’s self-activation page.
- There, register your SB8200.
- If you fail, find the HFC MAC address of the modem router on its label along with the Serial number.
- Contact the ISP and ask him to activate the internet connection since the router acts as a modem too.
- The setup process will be completed in some time.
You can again connect your wired or wireless devices to the Surfboard SB8200 in order to access the internet connection.
To Sum Up
Resetting the modem is not a difficult task at all. You just need to look for and press the RESET button. That’s all. However, you must know that this will require you to set up the router again as all the customized settings will be erased. We are expecting that you will be able to reset and set up the Arris Surfboard SB8200 using the given information.