Arris Surfboard SB6190 Setup: Connection and Configuration
The Arris Surfboard cable modem is a simple to setup and organize. The SB6190 device has so many LEDs which information is given on the ArrisSB6190 lights page. Here, you will get to know how to complete the Arris Surfboard SB6190 setup.
Arris Surfboard SB6190 Setup
The setup of the Arris SB6190 device is pretty easy, in which you just have to use the Co-axial cable to link ISP. Also need Power cord for power supply, and Ethernet cable for computer and router connection.
Connection
The modem is easy to connect with the home ISP server which you can do with the Co-axial cable. Just follow some steps to connect:
Connect the co-axial cable ends to the modem connector and ISP server socket. Then, you can power on the modem and connect other devices like computer, or laptop as well as the router.
It is time to configure the device with the help of the computer GUI interface.
Configuration
You have to turn on the modem which should connect to your ISP server socket. Then, connect computer to the modem with the help of the Ethernet cable. The cables must be in good condition. Go into the web browser and type in the IP address of the modem 192.168.0.1 or the URL www.surfboard.com. Press the Enter button, and you will get to the interface where you can easily register the Arris Surfboard SB6190 device. You must type the HFC MAC ID here to complete theregistration. This ID is given on the label of the device.
Troubleshooting Tips
There are some of major troubleshooting tips and solutions that help you tofix technical issues modem not working.
Reboot the Device
Restarting the network will allow modem settings to refresh, which will fix all bugs in the modem interface and hardware. To reboot the device you have to just follow some steps;
- Find the power button on the cable modem.
- Press it two times and the cable modem will restart.
Reset Arris Device
The last option if the Arris Surfboard SB6190modem is not connecting to the ISP or any network is reset the device. Follow some of the instructions to reset the device:
- Find the reset pinhole button on the extender.
- Give it a long press with a sharp object and release.
- The reset process will start, and it ends after some minutes.
After that, you have to reconnect the modem to the ISP and configure via Arris modem login interface.
The End Lines
From this blog post, you will get to know how to complete the Arris Surfboard SB6190 setup and how to register the product.