Arris SB8200 Lights Meaning
Arris SB8200 cable modem has various LEDs located on it. These lights indicate the working status of the modem. Knowing the Arris SB8200 lights behavior help you understand your modem and its network better. This guide describes the meaning of the Arris surfboard lights that are located at its front and back panel.
Different Arris Surfboard SB8200 Lights
Front Panel:
- Power
- Receive
- Send
- Online
Back Panel:
- Ethernet Ports LED
Understanding Arris Surfboard SB8200 Lights Meaning
If you have done an Arris Surfboard SB8200 setup at your home then knowing about the LEDs and their statuses will be helpful to you. The table below explains about different statuses of LEDs on the Arris modem and their meaning:
| Light | Icon | Status | Meaning |
|---|---|---|---|
| Power |  |
Green | Aris modem is powered on and it is properly connected to the power supply. The LED may take up to one minute to turn solid green when it is powered on. |
| Receive |  |
FlashingGreenBlue | The modem is scanning for a downstream channel Internet connection.A downstream channel is connected in DOCSIS 3.0 mode.Indicates a highspeed with downstream channels in DOCSIS 3.1. mode. |
| Send |  |
FlashingGreenBlue | This light flashes when the modem scans for an upstream channel internet connection.When an upstream channel is connected in DOCSIS 3.0 mode the SEND light turns green.This indicates a high-speed internet connection with upstream channels in DOCSIS 3.1 mode. |
| Online |  |
FlashingGreen | Arris modem is scanning for an Internet connection.Modem is connected to the internet. |
| Ethernet Ports |  |
Solid GreenFlashing GreenSolid Amber
Flashing Amber |
This indicates a data transfer rate of 1 gigabit per secondData traffic is in progressData transfer rate of less than 1 gigabit per second
Data traffic is in progress |
Troubleshooting Using Arris Surfboard SB8200 Lights
The above section walked you through the meaning of the lights on your Arris cable modem SB8200. You now know how to determine the working status of your modem using its lights. For instance, Arris Surfboard SB8200 blue light on Send and Receive LEDs means upstream and downstream data transfer.
Through this section, we will help you learn how you can troubleshoot any problem with the modem using the status indicated by the lights.
Arris Surfboard SB8200 Lights Blinking
You already know what a blinking or flashing light on the Arris cable modem implies. But at times, the light is stuck at blinking and the status does not change. In general Arris Surfboard SB8200 blinking light stuck means there’s an issue with the internet connection. Here are different troubleshooting tips that you can apply:
- The modem should be properly connected to the wall outlet. Check the coaxial cable if it is loose or damaged.
- The power supply to the modem must be consistent. Try to plug in the Arris modem to an alternative wall outletas the current one might be damaged.
- If the Ethernet ports LEDs keep blinking, then the chances are that the Ethernet cable is loose or the port is damaged. Insert the cable correctly and clean the port before inserting the cable. Use the second port to see if this helps you.
- Give your modem a quick reboot if the status of the LED does not change. Power it off and power it on after a couple of minutes.
- The ultimate fix is to reset the Arris modem. Use this step only when you have tried all other possible fixes.
Now you know Arris SB8200 lights and their meaning. You have also learned troubleshooting tips to resolve any issue if indicated by the unusual behavior of the Arris modem lights.