How to Log in to Arris Router via 192.168.0.1?

The IP address 192.168.0.1 helps you to log in to your Arris router’s web management utility using a browser. Whether you want to complete the initial setup or change the settings, the primary step is to log in. So, learn how to log in to your Arris router using the instructions provided below.

Arris Router IP Login Steps

Firstly, check that the router is connected properly to the internet gateway or internet modem. Secondly, confirm that the router’s power supply is consistent. Thereafter, follow the steps that follow:

Your PC must be on the router’s network. Therefore, using the Arris router’s SSID and WiFi password, join the network.
Run a browser of your choice now and visit 192.168.0.1 on it.
Fill in the Username and Password fields by entering the right credentials. The default credentials are admin and password respectively.
Hit Enter or click on the Apply button.

This takes you to the admin dashboard or System Basic Setup page or the web GUI of your Arris router. You can see various settings on the dashboard now. Customize the settings of your router according to your requirements now. Update the firmware on your router or change the WiFi password. You can also change the Arris router login password from its default value from here.

Steps to Update Arris Default Login Password

Visit 192.168.0.1 on a browser installed on a computer connected to Arris router’s network.
Use the default username and password to log in.
In the System Basic Setup page, click open Login Settings.
Update the admin login password from here and Apply the changes.

Apart from the admin password, you are recommended to update the WiFi SSID and password for your Arris router. The same can also be changed by logging in. The steps are highlighted below.

How to Modify the WiFi SSID and Password for Arris Router?

Log in to your Arris router using the login IP. The steps for the login process can be found on the same page.
Go to the Basic Setup page.
Click on Basic Setup.
Under the Wireless 2.4 GHz section, modify the Wireless Network Name and WiFi Security Key options.
Repeat the process for the Wireless 5 GHz section.
After making the desired changes, click Apply.
Your router will reboot to apply the changes done by you.

Your device will be disconnected from the Arris router’s network. After the router is powered on again, use the newly changed WiFi SSID and password to join its network again. You should manually connect all other connected devices.

Why is the Arris Router IP Login Not Working?

If you face login problems with your Arris WiFi router, then trying out the solutions listed in this section can help you out.

Do not make typing errors in the Arris router login IP, username and password.
Use the address field of an updated browser and refrain from making use of the search bar.
Try putting to use different browsers if login fails.
Do the login on an alternative device if one device does not let you get to the admin dashboard.
Turn off VPN connections and then log in.
Check the network connection. You should be on the Arris router’s local network. Try making an Ethernet connection to prevent network disconnections.

If the login does not happen even after these tips, then do this:

Reboot the Arris Router

Unplug the router and let it stay unplugged for a while. After that, plug it back and connect your computer to its network and try logging in.

Reset the Router

If you still fail to log in to your router using the IP address 192.168.0.1, then restore the default factory settings on it by resetting it. Reset and give your router a new start.

You can now log in to your Arris router using the IP 192.168.0.1 without getting stuck.